INSTALLATION GUIDES,WIRING DIAGRAM,QUICK START GUIDE, SERVICE MANUAL PROGRAMMING AUTOMATION, FACC,NICE, BENINCA, LIFTMASTER, CHAMBERLAIN, LIFTMASTER CAME SOMMER,MHOUSE GARAGE DOORS, AUTOMATIC GATES, AUTOMATIC DOORS, AUTOMATION CONTROL PANEL
Labels
- About us (11)
- Download (6)
- Gate automation (3)
- Manual garage automation (3)
- Manual gate automation (45)
- VIDEO (6)
- Wiring diagram (3)
duminică, 27 ianuarie 2013
Worth to buy a cheap garage door?
Garage door market worldwide in recent years has been invaded by poor quality products sold as "best".
Various garage doors are sold as leaders.
Our mistake is that we inquire before buying.
The client needs to know what they buy, and for this you must know what to ask.
So back to the title, it's worth buying a cheap garage door?
My answer you will find in the following lines.
1. A garage door can be expensive because the manufacturing process is rudimentary materials used are of poor quality, not technical conditions for prolonged use are not equipped with safety systems required for the safe and without risk to the user (finger trap protection, protection against breakage spring and fall door trap protection side).
It is therefore important that when you decide to purchase a garage door dealer to ask about these things and be careful not to be deceived.
These doors do not provide reliability, representing a danger to your family and your car.
2. A quality garage door may be cheap, but only if they are offered promotional discounts.
No need to compare quality garage door with a promotional price with low quality garage door and unsafe in operation.
3. When you want to make a price comparison must refer to the same level of quality products and technical.
You can not compare garage doors carried "on his knees" with garage doors manufactured in modern factories.
Firms producing garage doors which comply invest large sums of money in testing before the product is released.
Poor quality garage doors are seen in various sketches produced by other manufacturers technical manuals, trying to imitate them.
SOME DETAILS ABOUT INDUSTRIAL SECTIONAL DOORS, PANELS COLOURS RAL
Sectional industrial undersigned are made of 45mm thick sandwich panels or panels with extruded aluminum frames.
Advantages: space saving, diversity (colors, glazing), tilted different ways, depending on conditions on the ground, good thermal and acoustic insulation, possibility pedestrian access.
Maximum dimensions: 15m Standard latime.Culori sandwdich panels: exterior: anthracite RAL 7016, white RAL 9002, brown RAL 8014 gray RAL 9006, gray RAL 9007, white RAL 9016, red RAL 3000, blue RAL 5010; inside: RAL 9002 ;
Glazed panels are anodized E6/EV1.
Doors can be painted on request outside and / or inside in any RAL color.
Hardware: stainless steel
Vertical inclination: fold multiple ways depending on field conditions for maximum space savings.
Wicket: wicket doors with high threshold and low threshold adjacent pedestrian doors with or without light openers identical in appearance with sectional doors.
Automation:
Irreversible electromechanical industrial automation include electric motors:
- 24Vdc - the opportunity for frequent breaks batteries supplied with power and a duty cycle intensive (50%)
- 230Vac - for more power and a wider range of choices available, which is sufficient lower duty cycle - up to 40%
- 380V - for cases where force is required counts and frequency of use increased (60%)
Automation selection is made after evaluating operating conditions and construction of industrial sectional doors. An important role in studying the conditions that will automate work.
Doors Industrial Automation - Properties
The control unit is powered from 230Vac or 380V (if necessary).
They have a wide variety of specific functions and automatic sectional doors specific input commands (switches, radio control, etc..) And protection elements (photocells, sensitive edge, etc.).
Special models: panoramic glass doors, sectional doors fast, rigid shaft sectional doors, underground garage doors.
Advantages: space saving, diversity (colors, glazing), tilted different ways, depending on conditions on the ground, good thermal and acoustic insulation, possibility pedestrian access.
Maximum dimensions: 15m Standard latime.Culori sandwdich panels: exterior: anthracite RAL 7016, white RAL 9002, brown RAL 8014 gray RAL 9006, gray RAL 9007, white RAL 9016, red RAL 3000, blue RAL 5010; inside: RAL 9002 ;
Glazed panels are anodized E6/EV1.
Doors can be painted on request outside and / or inside in any RAL color.
Hardware: stainless steel
Vertical inclination: fold multiple ways depending on field conditions for maximum space savings.
Wicket: wicket doors with high threshold and low threshold adjacent pedestrian doors with or without light openers identical in appearance with sectional doors.
Automation:
Irreversible electromechanical industrial automation include electric motors:
- 24Vdc - the opportunity for frequent breaks batteries supplied with power and a duty cycle intensive (50%)
- 230Vac - for more power and a wider range of choices available, which is sufficient lower duty cycle - up to 40%
- 380V - for cases where force is required counts and frequency of use increased (60%)
Automation selection is made after evaluating operating conditions and construction of industrial sectional doors. An important role in studying the conditions that will automate work.
Doors Industrial Automation - Properties
The control unit is powered from 230Vac or 380V (if necessary).
They have a wide variety of specific functions and automatic sectional doors specific input commands (switches, radio control, etc..) And protection elements (photocells, sensitive edge, etc.).
Special models: panoramic glass doors, sectional doors fast, rigid shaft sectional doors, underground garage doors.
Gate automation systems
Automation for gates and doors are solutions for both the residential and industrial use, covering a wide range of equipment and accessories designed to ease the handling of doors and gates.
Depending on the type of door or gate automation systems can be divided into several categories:
Automation Systems swing - that rotating around a hinge
Sliding automation systems - where space usually has only one gate input
Special systems for garage doors - which are up-and-over and sectional
Automation are usually supplied with 230V AC and 24Vdc, thus ensuring a safe operation due to low voltage. Also, safety is enhanced by equipping automation systems that communicate user welcome light stage where movement is caused by automation and provides access light in interior areas.
To provide complete solution according to your needs, please schedule a free evaluation for our engineers from experts!
Depending on the type of door or gate automation systems can be divided into several categories:
Automation Systems swing - that rotating around a hinge
Sliding automation systems - where space usually has only one gate input
Special systems for garage doors - which are up-and-over and sectional
Automation are usually supplied with 230V AC and 24Vdc, thus ensuring a safe operation due to low voltage. Also, safety is enhanced by equipping automation systems that communicate user welcome light stage where movement is caused by automation and provides access light in interior areas.
To provide complete solution according to your needs, please schedule a free evaluation for our engineers from experts!
Why do we need your garage door automation?
Daily comfort is an essential element of our lives. Sometimes we are put in a position to make great efforts to obtain and sometimes we get it is at hand. As drivers, the benefits of automatic gates will help increase personal comfort.
Automating garage doors ease access, eliminating any effort that would have been made if the gates should be operated. With automation process automation swing gates or sliding gates, any car parking will be a pleasure.
When your garage doors benefit from automation systems, you will receive the best solution for personal safety and comfort. Also, you will not need to worry any concern regarding weather conditions. You do not have to step out of the car doors to act as a remote control push button will do all the work.
Regarding installation of gate automation systems, this is done in a very simple way, whether you are old or new doors. If you think you have to change the port to take advantage of such a system, you should know that is not the case. Your gateway can be upgraded and the investment will be a smaller one.
Try very well informed before purchasing products and services, selecting the best offers on the market with the best quality price.
Automating garage doors ease access, eliminating any effort that would have been made if the gates should be operated. With automation process automation swing gates or sliding gates, any car parking will be a pleasure.
When your garage doors benefit from automation systems, you will receive the best solution for personal safety and comfort. Also, you will not need to worry any concern regarding weather conditions. You do not have to step out of the car doors to act as a remote control push button will do all the work.
Regarding installation of gate automation systems, this is done in a very simple way, whether you are old or new doors. If you think you have to change the port to take advantage of such a system, you should know that is not the case. Your gateway can be upgraded and the investment will be a smaller one.
Try very well informed before purchasing products and services, selecting the best offers on the market with the best quality price.
Designing optimal size for garage door
Designing optimal size for garage door
Because it is a special door in comparison with pedestrian access doors or windows that you install in a home garage door needs some technical installation spaces.
First is instalaeaza sectional garage door in most sity in the inner face of the goal and not between sills input, such as the installation of joinery. Thus, the outer gauge entire garage door system is larger than input gap coverage and you will need that extra space inside the garage. To be able to appreciate the space covering garage door needs inside the garage you can calculate how many 150 mm on each side, 350 mm in the superior part ("the beam") and 1000 mm extra in the back. If you are still in the design phase of the garage is well to consider these figures to establish quotas construction. If you already have high construction but these rates were not kept not mean you should give up fitting a garage door because there are different technical solutions, such as a roller garage door.
Gap width and thus entry and garage door must be calculated first according to the number of machines - single or double garage - and depending on the possibility of access. Thus, if the garage entrance is from the side entrance opening width should be higher and if you have doubts about the input space to maneuver is best to do a simulation with the type of car that you will use. In practice, there are few situations when you are browsing or using garage big compromise because they did not correctly calculate the required fields.
Since the garage door is mounted on the inside face of the opening of the garage entrance usable depth must be calculated at the rate positioning of the door. For use as easy to be added to total depth and space to open the trunk and access it.
General recommendation remains that when projecting a garage or a garage door to always ask the opinion of a specialist garage doors can offer the best technical solution according to user needs but also your budget.
Because it is a special door in comparison with pedestrian access doors or windows that you install in a home garage door needs some technical installation spaces.
First is instalaeaza sectional garage door in most sity in the inner face of the goal and not between sills input, such as the installation of joinery. Thus, the outer gauge entire garage door system is larger than input gap coverage and you will need that extra space inside the garage. To be able to appreciate the space covering garage door needs inside the garage you can calculate how many 150 mm on each side, 350 mm in the superior part ("the beam") and 1000 mm extra in the back. If you are still in the design phase of the garage is well to consider these figures to establish quotas construction. If you already have high construction but these rates were not kept not mean you should give up fitting a garage door because there are different technical solutions, such as a roller garage door.
Gap width and thus entry and garage door must be calculated first according to the number of machines - single or double garage - and depending on the possibility of access. Thus, if the garage entrance is from the side entrance opening width should be higher and if you have doubts about the input space to maneuver is best to do a simulation with the type of car that you will use. In practice, there are few situations when you are browsing or using garage big compromise because they did not correctly calculate the required fields.
Since the garage door is mounted on the inside face of the opening of the garage entrance usable depth must be calculated at the rate positioning of the door. For use as easy to be added to total depth and space to open the trunk and access it.
General recommendation remains that when projecting a garage or a garage door to always ask the opinion of a specialist garage doors can offer the best technical solution according to user needs but also your budget.
Maintenance of sectional garage doors
In the same way that a garage door has an aesthetic role it must be functional and safe. Any garage door has a considerable weight from 15-20 kg for a single door, insulated, up to 70-80 kg for normal sectional door or up to 400-450 kg for large industrial doors. Regardless of the drive spring or running, manual or electric, it is very important that your garage door to work every time without problems and with maximum safety. With many mechanical parts in operation, some of them bearing large loads is inevitable wear over time. Therefore, the only way to safe operation and extended use as is their regular checking and maintenance. Verification must be made annually from the first year recommended use and absolutely necessary after the approximate life of the product, depending on door type and frequency of use it is 5, 7 or 10 years.
As for installation, maintenance must be performed by experienced personnel. And it is recommended that the user can make an external inspection, visual garage door, but any intervention sliding systems should be left to specialists.
Here are some of the problems that can be seen wearing a verification service team.
Sectional garage doors
Creased or misplaced roller hinges - door no longer closes properly or sliding weight.
Weight counterbalance springs broken - drive the manual version is slightly more noticeable because the door is heavy but electric drive motor version can offset the additional weight, the door will work, which will lead to premature engine wear.
Springs to counterbalance weight relaxed - while the steel they are made of springs is "weakening" and no longer supports the entire weight of the door and it tends to fall.
Cables support panels are "pinched" - due to friction with other components of the door or some external actions cables are broken filaments.
Support cables are broken - Garage door stopped working.
As for installation, maintenance must be performed by experienced personnel. And it is recommended that the user can make an external inspection, visual garage door, but any intervention sliding systems should be left to specialists.
Here are some of the problems that can be seen wearing a verification service team.
Sectional garage doors
Creased or misplaced roller hinges - door no longer closes properly or sliding weight.
Weight counterbalance springs broken - drive the manual version is slightly more noticeable because the door is heavy but electric drive motor version can offset the additional weight, the door will work, which will lead to premature engine wear.
Springs to counterbalance weight relaxed - while the steel they are made of springs is "weakening" and no longer supports the entire weight of the door and it tends to fall.
Cables support panels are "pinched" - due to friction with other components of the door or some external actions cables are broken filaments.
Support cables are broken - Garage door stopped working.
miercuri, 16 ianuarie 2013
How to mount a garage door sectional (Installation instructions)
Sectional garage door ASSEMBLY AUTOMATION SOMMER (VIDEO)
MCAGRUP ROMANIA
BENINCA CONTROL UNIT (CONTROL) MATRIX-CP.BULL sliding gates
User manual sliding gates max 1500kg kit Beninca italy pdf |
View more ebooks on ebookbrowse.com |
marți, 15 ianuarie 2013
Secrets behind an automation for gates
Secrets behind an automation for gatesI'm sure every time you went into a supermarket you wondered how to open doors when a person is in front of them? Maybe some of you have gone even further and have thought how could it to install such a system at home or at work? Now all these questions and have found an answer ... Next I will present the technology behind these gates automation.For starters I would like to establish a few basics. There are two types of gate automation: systems for sliding doors from the garage to the elevator, etc and swing door systems.Now we will deal with systems for sliding doors, so that in future you out the others.Suppose you have already installed a sliding door. Automation begins with an opening to mount an automatic mechanism that can interpret the message came from external stimuli.How this mechanism can be triggered? It's easy and you have even more options. You can use:- Proximity sensor (like those in supermarkets)- A button that you press when you want to open the gate or door- A control system with a card access of the- Automatically (for lifts)You've probably noticed that such a gate automation system allows automatic reopening when gate meets an obstacle. This is possible because of safety sensors. The purpose of these sensors is primarily to prevent the gate closing when a person is in their range of action. Such a system can be constructed by generating a laser signal between gate and pillars. If this signal is interrupted when the gate no longer closes.Now that we know something about the ways we may perform a gate automation to move on, namely the technology behind these systems.Opening mechanism is placed in the space above the door or gate. An engine that runs in a lower gear to have a small but speed and higher torque, drives a pulley mounted at one end of a belt. Gate is caught by the belt clip. To open the gate or door, rotate the engine pulley belt acting as lead gate movement. To close the gate, the system rotates clockwise.It is, in short, secret behind tutor automated gates and doors. There is nothing magical, just a little science.
Gate automation, automation, garage doors, barriers DEA
Gate automation, automation, garage doors, barriers DEA
DESIGN SERVICES GARAGE DOORS RESIDENTIAL, INDUSTRIAL-AUTOMATION GATES, BARRIERS
Emphasis on advice from the moment construction design to post-installation phase service.
In the design phase provide technical information necessary for assembly sectional door type and various types of automation, offering the best solutions for the efficient use of built space.
Clients are presented with the full range of models on offer, being guided in choosing the right options according to their wishes and needs, taking into account the technical conditions.
Finishing stage of construction we ensure that all technical conditions are met through regular consultation with the manufacturer installation.
Assembly stage, our team will ensure a professional installation and door automation. Experience in assembly is on the execution of numerous works of varied complexity. Logistics and personnel that allow us to respond with the same promptness so common requests for civil works and industrial demands for large-scale works.
The warranty period periodic inspections mounted installations. Also ensure prompt action on various applications.
In the post-warranty can opt for a service contract with periodic review of facilities, ensuring proper functioning long term. Also during this time to ensure intervention for applications to remedy any defects.
The customer is the center of our attention. Therefore all our efforts to pleasantly surprise you with quality, timeliness and speed in execution.
Services staff
We ensure that all technical and commercial information required by employees to reach them in the shortest possible time.
Manuals are provided monaj and product manuals.
Employees are supported with leaflets and samples.
When appropriate to assist in establishing the correct order.
Provides information on time and prompt livrare.Livrarea is made within 10 days
For any kind of collaboration, please send mail to automatizari.nice @ gmail.com or automatizariroman@yahoo.com
In the design phase provide technical information necessary for assembly sectional door type and various types of automation, offering the best solutions for the efficient use of built space.
Clients are presented with the full range of models on offer, being guided in choosing the right options according to their wishes and needs, taking into account the technical conditions.
Finishing stage of construction we ensure that all technical conditions are met through regular consultation with the manufacturer installation.
Assembly stage, our team will ensure a professional installation and door automation. Experience in assembly is on the execution of numerous works of varied complexity. Logistics and personnel that allow us to respond with the same promptness so common requests for civil works and industrial demands for large-scale works.
The warranty period periodic inspections mounted installations. Also ensure prompt action on various applications.
In the post-warranty can opt for a service contract with periodic review of facilities, ensuring proper functioning long term. Also during this time to ensure intervention for applications to remedy any defects.
The customer is the center of our attention. Therefore all our efforts to pleasantly surprise you with quality, timeliness and speed in execution.
Services staff
We ensure that all technical and commercial information required by employees to reach them in the shortest possible time.
Manuals are provided monaj and product manuals.
Employees are supported with leaflets and samples.
When appropriate to assist in establishing the correct order.
Provides information on time and prompt livrare.Livrarea is made within 10 days
For any kind of collaboration, please send mail to automatizari.nice @ gmail.com or automatizariroman@yahoo.com
Automation Systems-Performance Optimization
Using automation systems we sell and install, we can provide solutions to facilitate or restrict access to any space.
We provide technical solutions to automate any type of gate: light or heavy, swinging or sliding, residential or intensive. Thus, you will not get wet if it rains, you will not leave the car started to go down the street to open and close the gate. So, fewer worries and more comfort and safety for you!
Choosing automation systems we offer, in addition we can also provide accessories to wear. They extend the life of the automation system.
To control access to a street or a building existing business solutions from the simplest to the most sophisticated. We offer solutions only those who want to get you in the days and the hours that you set. Comfort and tranquility are guaranteed!
We provide technical solutions to automate any type of gate: light or heavy, swinging or sliding, residential or intensive. Thus, you will not get wet if it rains, you will not leave the car started to go down the street to open and close the gate. So, fewer worries and more comfort and safety for you!
Choosing automation systems we offer, in addition we can also provide accessories to wear. They extend the life of the automation system.
To control access to a street or a building existing business solutions from the simplest to the most sophisticated. We offer solutions only those who want to get you in the days and the hours that you set. Comfort and tranquility are guaranteed!
About industrial garage doors
INDUSTRIAL GARAGE DOORS
Industrial garage doors are made to respond to requests coming apart and must comply with high standards of functionality, durability and utility. In the manufacture of this type of product, should consider the following variables:
specific needs of the client;
manufacturing technology limitations;
technological limitations of exploitation;
legislation;
Technical characteristics of industrial garage doors
provide high thermal insulation;
offers the possibility of installing a skylight or a panoramic glazing for better natural lighting;
allow the installation of a pedestrian doors and other components;
products resistant, extremely strong, light and safe to handle;
termizolate panels 40 mm any color from the RAL
protection against broken springs, broken cables and springs protection bar;
drilled holes for easy mounting;
interior and exterior lift handle (black);
95 kg/m2 wind resistance;
Optic Indoor - outdoor hot dip galvanized for long life and durability;
insulated panels filled with polyurethane foam insulation, without Freon;
all systems themselves are made of stainless steel;
galvanized wire;
hinges and building elements are made of hot-galvanized steel;
Constructive maximum dimensions (W x H): 7000 * 6000 (recommended by manufacturer)
possible chain manually operated or automated;
Industrial garage doors are made to respond to requests coming apart and must comply with high standards of functionality, durability and utility. In the manufacture of this type of product, should consider the following variables:
specific needs of the client;
manufacturing technology limitations;
technological limitations of exploitation;
legislation;
Technical characteristics of industrial garage doors
provide high thermal insulation;
offers the possibility of installing a skylight or a panoramic glazing for better natural lighting;
allow the installation of a pedestrian doors and other components;
products resistant, extremely strong, light and safe to handle;
termizolate panels 40 mm any color from the RAL
protection against broken springs, broken cables and springs protection bar;
drilled holes for easy mounting;
interior and exterior lift handle (black);
95 kg/m2 wind resistance;
Optic Indoor - outdoor hot dip galvanized for long life and durability;
insulated panels filled with polyurethane foam insulation, without Freon;
all systems themselves are made of stainless steel;
galvanized wire;
hinges and building elements are made of hot-galvanized steel;
Constructive maximum dimensions (W x H): 7000 * 6000 (recommended by manufacturer)
possible chain manually operated or automated;
luni, 14 ianuarie 2013
Drive automatic garage doors,components mounting details
For all types of garage doors are technical solutions to help drive their electric motors. The electric motor itself, in order to work properly, is part of a more complex system called automatic or, more simply, automation. Automatic operation, depending on the type of garage door and user needs, includes: a cap of the race, a different interface for control and safety systems and control.
Stroke limitation system is designed to control the electric motor off right where the garage door reaches the open and close limits. Technical solutions most common are mechanical stroke limiter (when the door reaches the end of a track race contact the motions that control the engine off) or electromagnetic (control unit stores with an electromagnet number of revolutions the engine makes it to reach the end of the race).
Interface or control panel has various configurations to meet different user needs. The system is simple with buttons or, for security needs, with selector (switch) key. The most common and easy operation, especially for residential garage doors is controlled. Less common, especially in industrial applications are radar detectors (any movement in the opening drive control radar) mass detectors metal (detects only cars), access control systems (user uses an access card) or more recently, GSM interface (control garage door is made from a mobile phone).
Safety and control systems are very different. Some of the most used are:
Closing delay - the door is opened by any but the lock control system is programmed to turn itself off after a period of time chosen by the user.
Overload protection - electronic unit "reads" the motor power consumption so that if a meeting obsatcol the path of the door, it will stop.
Stop and Start slow - the engine is controlled by the central unit to slow speed operation when the garage door reaches the end of the race.
Photocells - safety is a system consisting of a pair of cells located in the infrared passing cars. Interruption of the connection between the two cells that communicate CPU machine, other objects or persons are in the path of the garage door and drive it off the motor command.
Safety edge (safety edge) - weatherstrip on the bottom of garage doors incorporates a system that detects when, during closing garage door touches any object or person. The principle of operation can be also infrared, as photocells, or pressure hose.
Stroke limitation system is designed to control the electric motor off right where the garage door reaches the open and close limits. Technical solutions most common are mechanical stroke limiter (when the door reaches the end of a track race contact the motions that control the engine off) or electromagnetic (control unit stores with an electromagnet number of revolutions the engine makes it to reach the end of the race).
Interface or control panel has various configurations to meet different user needs. The system is simple with buttons or, for security needs, with selector (switch) key. The most common and easy operation, especially for residential garage doors is controlled. Less common, especially in industrial applications are radar detectors (any movement in the opening drive control radar) mass detectors metal (detects only cars), access control systems (user uses an access card) or more recently, GSM interface (control garage door is made from a mobile phone).
Safety and control systems are very different. Some of the most used are:
Closing delay - the door is opened by any but the lock control system is programmed to turn itself off after a period of time chosen by the user.
Overload protection - electronic unit "reads" the motor power consumption so that if a meeting obsatcol the path of the door, it will stop.
Stop and Start slow - the engine is controlled by the central unit to slow speed operation when the garage door reaches the end of the race.
Photocells - safety is a system consisting of a pair of cells located in the infrared passing cars. Interruption of the connection between the two cells that communicate CPU machine, other objects or persons are in the path of the garage door and drive it off the motor command.
Safety edge (safety edge) - weatherstrip on the bottom of garage doors incorporates a system that detects when, during closing garage door touches any object or person. The principle of operation can be also infrared, as photocells, or pressure hose.
Abonați-vă la:
Postări (Atom)